Incorporates a truly modular design providing easily configurable, expandable DC power cabinets.

Systems can be quickly and efficiently configured to suit most applications using modular hot-plug Milennium rectifiers and various battery and distribution options, providing cost-effective solutions.

At any time it is possible to increase or remove rectifier modules without effecting system operation.

The Magnum 750 Amp PowerBay system is a complete modular DC powerplant providing up to 750 Amps of power at 48-Volts using Magnetek’s 50 AmpUL listed and NEBS certified rectifiers .The Magnum PowerBay system is designed for maximum flexibility andexpandability to address medium load requirements for a wide range ofapplications. As the system load increases, system capacity is easily increasedby simply plugging additional rectifiers into the existing mounting space inthe power bay (maximum 15 rectifiers), no set-up or adjustment is required.This design allows the user to appropriately size a power plant up to 750Amps to provide load power, battery float current and battery recharge current. The MAGNUM 750A system has complete control and supervision features viathe PSC2000 Controller and includes Battery Reserve Time Prediction. Allsystem parameters are remotely accessible with connectivity through RS232,modem or Ethernet.

Designed for small power plant for Telecom, Industrial and EDP applications.

The rectifier can be used in N+1 multiple shelf configuration as well as in stand alone shelf.

Designed for small power plant for Telecom, Industrial and EDP applications.

The rectifier can be used in N+1 multiple shelf configuration as well as in stand alone shelf.

Front plated LED’s allow easy visualization of unit status.

Designed for telecom, industrial and ITsmall-sized power applications, Magnetek’s 750 W Rectifiersconvert commercial 90-264 Volts Ac input power at 50 or 60 hertz into a highly regulated, filtered, low-noise and isolated 48 Volt Dc output. The unit achieves electrical efficiencies of 91%at 230 Volt Ac. The unit is designed to be used in N + 1 multiple shelf configuration as well as a stand-alone unit. The 750 W Rectifiers are hot swappable into Magnetek’s standard 19” or 23” subracks for easyupgrading of your rectifiers—even while the system is online—without interrupting the load. Unit has “plug and play” capability (no adjustments needed) so installation is quick and simple.Designed to interface with control unit either analogically or digitally. Front LED’s allow easy visualization of unit status. UL, CSA and IEC certified.

Designed for superior performance in telecom, datacom, industrial and IT applications, Magnetek’s1500 W Rectifiers convert commercial 85-264 Volts Ac input power at 50 or 60 hertz into a highlyregulated, filtered, low-noise and isolated 48 Volt Dc output. The unit achieves electrical efficienciesof 89% with a power density of 4.8 W/in3.The unit is designed to work in N + 1 redundant configurations. The 1500 W Rectifiers are hotswappable into Magnetek’s standard 19” or 23” subracks for easy upgrading of your rectifiers—evenwhile the system is online—without interrupting the load. Unit has “plug and play” capability(no adjustments needed) so installation is quick and simple. Up to five units will fit in a single shelf,mountable in 23” rack. Unit has alarm LED’s and test points on the front panel to visualize working conditions. It interfacesvia analog link to Magnetek’s power system controllers, or can be easily interfaced with most systemcontrollers available on the market.

Designed for superior performance in telecom, datacom, industrial and ITapplications, Magnetek’s3000 W 3U Compact Rectifiers achieve a very high efficiency (92%) as a result of a remarkablyefficient special phase shift topology. Measuring just 5.13”W x 5.21”H x 12.5”D this unit has apower density in excess of 9 W/in3. The unit is designed to work in N + 1 redundant configurations. The 3000 W 3U Compact Rectifiersare hot swappable into Magnetek’s standard 19” or 23” subracks for easy upgrading of yourrectifiers—even while the system is online—without interrupting the load. Unit has “plug and play”capability (no adjustments needed) so installation is quick and simple. The unit has alarm LED’s and test points on the front panel to visualize working conditions. It interfaces via serial link to Magnetek’s power system controllers, or can be easily interfaced withmost system controllers available on the market.

Designed for superior performance in Telecom applications.

The high efficiency of the units and the innovative solutions adopted for its electronics have allowed to make this unit one of the most compact 12000W rectifiers forced cooled.
The unit is provided with alarm to visualize working conditions.
Designed for energy plants in N+1 configuration.
Hot pluggability.